|
MSDS
The information in this Material Safety Data Sheet (MSDS) is believed to be correct
as of the date issued. KWIK COMPANY MAKES NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR
COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for
determining whether the KWIK product is fit for a particular purpose and suitable
for the user's method of use or application. Given the variety of factors that can
affect the use and application of a KWIK product, some of which are uniquely within
the user's knowledge and control, it is essential that the user evaluate the KWIK
product to determine whether it is fit for a particular purpose and suitable for user's
method of use or application
Disclaimer
The information set forth is based on information which KWIK believes to be
accurate. No warranty, expressed or implied, is intended. The information is
provided solely for your information and consideration and KWIK assumes no legal
responsibility for use or reliance thereon.
Abbreviations: N/D Not Determined N/A Not Applicable CA Approximately
HEATSHIELD-R20
HMIS RATING: MATERIAL SAFETY DATA SHEET
1-Health
0-Flammability HEATSHIELD-R20 Soda - Lime Borosilicate Glass
0-Reactivity
SECTION 1-Chemical Product and Company Identification
Trade Name Date Created 11/10/98
HEATSHIELD-R20
Manufacturer/Supplier Emergancy No. Telephone No.
KWIK COMPANY 281/689-7765 281/399-9334
HEATSHIELD-R20
2615 Appian Way
Roman Forest, TX 77357
SECTION II-Composition/information on Ingredients
1. INGREDIENT C.A.S. No. PERCENT
SODA LIME BOROSILICATE GLASS......................65997-17-3 97.0 100.0
AMORPHOUS SILICA-------------------------------------------7631-86-9 3.0
The components of this product are in compliance with the chemical notification requirements of
TSCA. All applicable chemical ingredients in this material are listed on the European Inventory
of Existing Chemical Substances (EINECS), or are exempt polymers whose monomers are listed on
EINECS.
2. PHYSICAL DATA
BOILING POINT........................................N/A
VAPOR PRESSURE----------------------------------- N/A
VAPOR DENSITY--------------------------------------N/A
EVAPORATION RATE------------------------------- N/A
SOLUBILITY IN WATER----------------------------slight
SPECIFIC GRAVITY.................................. .12 - .63 g/cc
--------------------------------------------------------------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A Not Applicable CA - Approximately
HEATSHIELD-R20
2. PHYSICAL DATA (continued)
PERCENT VOLATILE................................< 0.5 % by wt.
BELOW 0.5% BY WT.
PH........................................................... BASIC
VISCOSITY----------------------------------------------- N/A
MELTING POINT----------------------------------------N/D
APPEARANCE AND ODOR:
Low density fine powder (between 10 and 170um diameter), white, odorless.
----------------------------------------------------------------------------------------------------------
3. FIRE AND EXPLOSION HAZARD DATA
FLASH POINT.......................................N/A
FLAMMABLE LIMITS - LEL...................N/A
FLAMMABLE LIMITS - UEL...................N/A
AUTOIGNITION TEMPERATURE------------N/A
EXTINGUISHING MEDIA:
Non-combustible. Choose material suitable for surrounding fire.
SPECIAL FIRE FIGHTING PROCEDURES:
Wear full protective clothing, including helmet, sefl-contained, positive pressure or pressure demand
breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and pro-
tective covering for exposed areas of the head.
UNUSUAL FIRE AND EXPLOSIONS HAZARDS:
No unusual fire or explosion hazards are anticipated.
NFPA HAZARD CODES: HEALTH: 0 FIRE: 0 REACTIVITY: 0
UNUSUAL REACTION HAZARD: none
---------------------------------------------------------------------------------------------------------
4. REACTIVITY DATA
STABILITY: Stable
INCOMPATIBILITY - MATERIALS/CONDITIONS TO AVOIED: None known.
HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.
________________________________________________________________________________
Abbreviations: N/D - Not Determined N/A - Not applicable CA - Approximately
HEATSHIELD-R20
4. REACTIVITY DATA (continued)
HAZARDOUS DECOMPOSITION PRODUCTS:
Silicon tetrafluoride when dissolved in hydrofluoric acid.
5. ENVIRONMENTAL INFORMATION
SPILL RESPONSE:
Refer to other sections of this MSDS for information regarding physical and health hazards, respiratory
protection, ventiltaion and personal protective equipment. Ventilate area. Vacuum, use wet sweeping
compound or water to avoid dusting. CAUTION! A vacuum cleaner could be an ignition source. Place
in an approved metal container.
RECOMMENDED DISPOSAL:
Dispose of waste product in a sanitary landfill.
ENVIRONMENTAL DATA:
Not determined.
REGULATORY INFORMATION:
Volatile Organic Compounds: N/A.
VOC Less H2O & Exempt Solvents: N/A
Since regulations vary, consult applicable regulations or authorities before disposal. In the event of an
uncontrolled release of this material, the user should determine if the release qualifies as a reportable
quantity.
EPCRA HAZARD CLASS:
FIRE HAZARD: No PRESSURE: No REACTIVITY: No ACUTE: Yes CHRONIC: No
6. SUGGESTED FIRST AID
EYE CONTACT:
Immediately flush eyes with large amounts of water. Get immediate medial attention.
SKIN CONTACT:
Flush skin with large amounts of water. If irritation persists, get medical attention.
INHALATION:
If signs/symptoms occur, remove person to fresh air. If signs/symptoms continue, call a physician.
______________________________________________________________________________
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
6. SUGGESTED FIRST AID (continued)
IF SWALLOWED:
Drink two glasses of water. Call a physician.
HEATSHIELD-R20
7. PRECAUTIONARY INFORMATION
EYE PROTECTION:
Avoid eye contact. Wear apprepriate gloves when handling this material. Use one or more of the
following personal protection items as necessary to prevent skin contact: apron, coveralls.
RECOMMENDED VENTILATION:
Use with appropriate local exhaust ventilation. Provide appropriate local exhaust ventilation at transfer
points. Use in a well ventilated area. If exhaust ventilation is not adequate, use appropriate respiratory
protection.
RESPIRATORY PROTECTION:
Avoid breathing of dust. Select one of the following NIOSH approved respirators based on airborne
concentration of contaminants and in accordance with OSHA regulations: half-mask supplied air
respirator, full-face dust respirator, full-face high-efficiency filter respirator, full-face supplied air
respirator, full-face dust respirator, full-face high efficiency filter respirator, full-face supplied air
respirator.
PREVENTION OF ACCIDENTAL INGESTION:
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
Do not ingest.
RECOMMENDED STORAGE:
Keep container dry. Keep container closed when not in use. Keep out of the reach of children.
FIRE AND EXPLOSION AVOIDANCE:
Not applicable.
HMIS HAZARD RATINGS: HEALTH: 1 FLAMMABILITY: 0 REACTIVITY: 0
PERSONAL PROTECTION: X (See precautions, section 7.)
___________________________________________________________________________________
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
|
